Любіть Україну у сні й наяву,
Вишневу свою Україну,
Красу її, вічно живу і нову,
І мову її солов'їну.
В. Сосюра

Department of Engineering Technology was established on the basis of electromechanical faculty in 1996 during the reorganization of the department construction machines and equipment.

Department of Engineering Technology prepares highly qualified specialists:

qualification level – bachelor in 131 «Applied Mechanics»

qualification level – master specialty 131  «Applied Technology»

The department has seven specially equipped laboratories, a computer room, a workshop and an office for a total area of 1170.5 m2

The department operates postgraduate specialty 05.02.08 «Engineering Technology».

By decision of the Academic Council of the University in 1996 created the Department of Engineering Technology. Professor V.U. Ustyantsev became  the founder of the department. The department was headed by:

  • Ph.D., associate professor V.U. Ustyantsev from 1996 to 1997;

  • associate professor Anatoly Vasilyev, 1997 to 2010;

  • PhD, senior researcher Nikolai Zholtkevych in 2010-2012;

  • from 2012 to the present time the department is headed by PhD, professor Frolov Evhen.

The department is the base for training specialists in the field of "Engineering Mechanics" and «Engineering Technology» specialty.

Departments teachers major efforts  are directed to form the students skills of creatively using the knowledge in solving various issues that arise in the process of engineering for the future specialist.

Inventors, engineers and technologists  with creativity are needed to achieve success in the creation of various items of equipment, new technology and process control. That is why the Department of Engineering Technology teachers major task is a transition in the educational process of accumulation of knowledge to a more progressive system - students perform engineering work. To adapt to future specialists working conditions the department created 2 branches, one of them - at PJSC "Research Plant", and the second - by PJSC "Turbomechanical plant".

Deeply aware of the needs of the modern building industry professionals in the new formation, the Department focuses its work on the educational use of the basic layout of the production equipment and real, existing equipment, which experts have to work with soon. In addition, we have developed a number of problems and situational problems, complex tasks aimed at implementation of engineering work.

Dept. serious attention is given to students training course and diploma projects and works. When they try performing them teachers direct students to the practical solution of technical problems that arise before a specialist in real work

An appropriate laboratory basis exists. Courses at the Department provided teaching aids and materials for laboratory work, practical classes, term papers, research papers and diploma projects.

Kravchenko Sergey,

Ph.D., Associate Professor,

Head of Engineering Technology Department.

Teaching Staff of Engineering Technology Department (1 doctor, professor, 5 Ph.D., associate professors, 2 senior lecturers) provide teaching of more than 30 subjects.

Kravchenko Sergey, Ph.D., Associate Professor, Head of Engineering Technology Department.

Works in PoltNTU since 2003, has more than 70 scientific and methodical works including Scopus, patents, manuals.

Supervises the work DELCAM PoltNTU center. Courses: "Technological foundations machine", "Metal-cutting machine tools ", "Machine-aided manufacturing equipment."

Frolov Evhen, PhD, Professor.

Works in PoltNTU since 2012, has more than 200 scientific and methodical works including foreign publications, patents, manuals, a member of two specialized scientific councils of theses defense, supervises preparation of graduate students, conducts an active scientific work.

Courses: " Technology of mechanical engineering", "Experimental Methods in Engineering Mechanics", "Scientific research on the chosen theme", "Research on the chosen theme", "Mathematical models of machines in computer calculations".

Vasylyev Anatoliy, Ph.D., Associate Professor

Works in PoltNTU since 1990, has more than 100 scientific and methodical works including Scopus, patents, lectures, conducts an active scientific work.

Courses: "Machine parts", "Interchangeability, standardization and technical measurements," "Mechanics of Machines", "Processing technology standard parts and assembly of machines and technological equipment".

Kalashnikov Anatoliy, Ph.D., Associate Professor

Works in PoltNTU since 1990, has more than 60 scientific and methodical works including foreign publications, patents and lectures.

Courses: "The technology of construction materials and engineering", "Assembly stations and shops in engineering", "Technology of construction materials".

Gnitko Sergey, Ph.D., Associate Professor.

Works in PoltNTU since 1997, has more than 40 scientific and methodical works including Scopus.

Courses: "Metrology, Standardization and Quality Control", "Basic design of electric mechanical parts".

Popov Stanislav, Ph.D., Associate Professor.

Works in PoltNTU since 2003, has more than 90 scientific and methodical works, including Scopus, patents, lectures, conducts an active scientific work.

Courses: "Cutting tools", "Theory of cutting", "Tool-aided manufacturing software".

Yasko Stanislav, Senior Lecturer

Employee of PoltNTU DELCAM Center. Works in PoltNTU since 2002, has more than 50 scientific and methodical works, including foreign publications and patents.

Courses: "Software machining and manufacturing processes", "Metrology Standardization and Quality Control".

Shpilka Andrei, Senior Lecturer.

Works in PoltNTU since 2007, has more than 40 scientific and methodical publications, patents.

Courses: "The technology of construction materials and engineering", "Metallurgy and Welding", " Theoretical foundations of technology of production and assembly of machines ", "Exploitation, maintenance and repair of machines".

Horugiy Eduard, Head of the Laboratory.

Since 2010. Higher education.

 

Nazarenko Svetlana, senior analyst.

Since 1998. Higher education.

Department of Engineering Technology is one of the graduating departments in Poltava National Technical University named after Yuriy Kondratyuk. It offers a Bachelor direction "Engineering Mechanics", specialists and masters in "Engineering Technology".

In 2011, the department was accredited and licensed specialty and by 2021 was licensed by the Ministry of Education, Youth and Sports of Ukraine to continue to provide educational services related to obtaining higher education level qualifications to Bachelor and Master (including foreigners).

Licensed number of reception:

- Bachelor of " Applied Mechanics" 131  - 75 persons (full / part-time learning);

- Masters specialty " Applied Technology" 131 - 25 people (full-time education).

The purpose of scientific, technological and innovation activities at the university is its academic and staffing, the economy of the city, the region, the region and the needs of the individual and society through the creation, accumulation and use of knowledge, training required country.

Research School Department:

- at the Engineering Technology Department is a scientific school "Innovative technology in engineering" (Head – prof. E. Frolov);

The main directions of scientific interests of the department:

- introduction of the newest stamping technologies;

- improvement of materials processing technologies;

- development of wear-resistant coatings.

Achievements:

- defense of dissertations;

- obtaining scientific degrees;

- publications in international scientific-metric bases (including Scopus) and professional editions (journals, collections);

- submission of applications and obtaining patents for inventions and utility models;

- direct holding and participation in international and Ukrainian scientific and technical conferences on the profile.

Scientific relations with the institutions of the National Academy of Sciences of Ukraine, branch academies of sciences, universities, enterprises and institutions:

- Institute of Problems of Material Science named after I.M. Frantsevich National Academy of Sciences of Ukraine;

- Institute of Technical Thermophysics of the National Academy of Sciences of Ukraine;

- Institute of Electrodynamics of the National Academy of Sciences of Ukraine;

- Institute of superhard materials named after V.M. Bakul National Academy of Sciences of Ukraine;

- National Technical University of Ukraine "Kyiv Polytechnic Institute";

- National Technical University "Kharkiv Polytechnic Institute";

- Zaporizhzhya National Technical University;

- Kremenchuk National Mikhail Ostrogradsky University;

- Priazovsky State Technical University;

- Zhytomyr State Technological University;

- Mykolaiv National Agrarian University;

- Chernihiv National Technological University;

- East-Ukrainian Volodymyr Dahl University;

- Sumy State University;

- Belarusian National Technical University;

- Abu Reichan Bouruni Tashkent State Technical University;

- Otto von Guericke University Magdeburg;

- «АvtoKrАZ»;

- «Poltava turbomechanical plant»;

- «Poltava autogeneration plant»;

- «Poltava Diamond Tool»;

- «Poltava machine-building plant»;

- «Poltava experimental mechanical plant».

Student work:

- prepare of scientific reports at university, Ukrainian and international conferences;

- publication of scientific research results;

- participation in student contests of scientific works.

Student of Engineering Technology Department, Vladislav Mesevrenko, was awarded the diploma of the 1st degree on the results of the 2nd round of Ukrainian contest of student scientific works in the field of sciences "Processing of materials in mechanical engineering", Zhytomyr, Zhytomyr State Technological University, March 23-24, 2017.

 

Research groups:

  • "Construction materials";
  • "Parts of machines";
  • "Metal-cutting machine tools";
  • "Innovative technologies in mechanical engineering feat DelCAM".

 

Research topics:

The purpose of research is to improve the manufacturability of industrial equipment and technology.

As a result of studies in recent years developed:

- drill for drilling thermoplastic;

- rotary cutters for cutting;

- methods of improving the stability of carbide cutting tools;

- combined finger cutters;

- welding machine series «YS 010";

- special welding machine series «YS 020";

- semi-automatic assembly site "piastres";

- technology of powder from basalt;

- mortar pumps, mortar mixers;

- taper bearing;

- source of welding current;

- diamond pencil from CVD.

Developments of the department allow you to reduce costs and time by automating the production and use of new materials and processing schemes.

University lecturerі of the Department report the results of scientific research annually. This is happening at conferences in Ukraine and abroad.

Traditionally Department takes part in roundtable discussions at the annual National Scientific Forum of NAS of Ukraine institutions and universities of Ukraine and the annual scientific conference of professors, university lecturer, researchers and students of the university.

In recent years, the Department held scientific and technical conferences:

- 2013. I International Scientific Conference "High technologies in mechanical engineering" Poltava National Technical University, which took place with the participation of University of Magdeburg Otto von Guericke University, Belarusian National Technical University, Tashkent State Technical University of Wroclaw Polytechnic Institute of Physics and Technology Institute of Metals and alloys National Academy of Sciences of Ukraine, State Enterprise "Kharkov machine-building plant" FED "SE" Kharkiv research Institute of Manufacturing engineering";

- 2014 II International Scientific Conference "High technologies in mechanical engineering" Poltava National Technical University, which took place with the participation of University of Magdeburg Otto von Guericke University, Belarusian National Technical University, Tashkent State Technical University of Wroclaw Polytechnic Institute of Physics TECHNOLOGICAL Institute of metals and alloys of NAS of Ukraine, State Enterprise "Kharkov machine-building plant" FED "SE" Kharkiv research Institute of Manufacturing engineering";

- 2015 I Ukrainian scientific-technical conference "High technologies in mechanical engineering" Poltava National Technical University, which took place with the participation of Kremenchuk National Michael Ostrogradsky University.

Each university lecturer works on research in the field of mechanical engineering. The results of scientific research are used in the preparation of scientific articles for publication in professional editions, reports at scientific conferences, as well as during the management of graduate and master's studies of students in the process of writing dissertation papers.

On February 19, 2010 in Poltava National Technical University named after Yuriy Kondratyuk there was a ceremonial signing of the tripartite agreement on the opening of the Delcam training center within a single project called "Advanced computer technology to universities in Ukraine." Now students PoltNTU will study the newest modern computer programs licensed by British company Delcam.

Delcam is the world leader in the European market of software for modeling, fabrication and control of complex products and tooling. Founded in 1977 at Cambridge University, the company now has over 30,000 users including organizations in more than 90 countries. Its growth is caused by the success of software that offers a series of best-in-class solutions.

The project "Advanced computer technology to universities in Ukraine" is working in Ukraine for almost 10 years. Its goal is the introduction of computer-aided design and production of the learning process and further development contacts in the field of information technology. During this time, Delcam services are already used in the 17 leading technical universities in Ukraine. Now our students and teachers of Poltava National Technical University named after Yuri Kondratyuk have the opportunity to join world-class software.

Director Hugh Humphreys Delcam (UK) gave the educational institution a certificate for the right to use the software, the commercial value iof which is1, 7 million.

Opening Delcam Training Centre in Poltava National Technical University named after Yuriy Kondratyuk contributed to increased level of training, especially of the engineering specialties, especially engineering. And not only electromechanical faculty use the latest computer software - it is used also in architectural and faculty information and communications technologies and systems.

According to the contract order of the University of 04.01.2011 at the Department of Engineering Technology and Department of Computer and Information Technology and Systems PNTU established training center "PNTU - Delcam» with students and professionals of the region software products CAD / CAM technology company Delcam Plc. Head of the Centre has been appointed assistant professor of Engineering Technology S.I. Kravchenko is responsible performer - assistant professor of computer and information technology systems forties SorokoV.U.i O.I. and senior lecturer in Engineering Technology Yasko S.G. Location - 308TS audience. Support the project assigned to the Information Technology Center.

A new modernized computer lab for 20 jobs with the new generation of computers that meets all the requirements of modern equipment.

Since September 2010 introduced in the educational process of teaching students software PowerSHAPE-based credit-modular system in preparation "Engineering Mechanics" in the discipline "Computer Simulation" for 3 courses. (108 hours 20 - lectures 36 - laboratory., exam).

Since January 2011 introduced in the educational process of teaching students in 3rd and 4th year students in the direction of "Engineering Mechanics" PowerMILL software in the discipline "CAD technological preparation of production equipment for machining CNC" (90 hours 42 - lectures , 32 - labs., exam).

Centre will participate in the international conference "Information technologies Delcam in education and research." Conferences are held with the support of Delcam, JSC "Motor Sich", GP ZMKB "Ivchenko-Progress" Center of CAD (Lviv).

Students of the department participate in the annual International Competition nominal prizes Delcam. Research work of students for five consecutive years (2011 - 2015) took prizes and was published in the annual international book. The rewarding ceremony was held at the residence of British Ambassador to Ukraine.

Also, the Center actively participates in competitions in computer modeling and automated production design processes.

On the basis of the center Delcam PoltNTU round tables are held on the topic "New features of the Delcam» with representatives of enterprises of Poltava region.

A student scientific circle in-depth study of software Delsam. Annually prepare student entries at nominal premium Delcam.

Center provides technical assistance to faculty departments to develop training courses using software Delsam.

Within the framework of cooperation agreements with JSC "PAAZ" and PJSC "PTMZ" is expected in the future implementation of software Power Solution Delcam for enterprises of Poltava region. At PJSC "Poltavamash" this software is already installed.

Those wishing to enter the specialty 131 "Applied Mechanics" ("Technology of Mechanical Engineering") are offered:

EDUCATION LEVEL "BACHELOR"

Qualification – Technical specialist - mechanic

Training term – 4 years

Primary positions: technician or engineer-designer, engineer-technologist, mechanical engineer mechanization and automation of production, organization and standardization of labor, organization of operation and repair of machines and mechanisms, mechanic-debugger, master or mechanic of the shop, senior laboratory assistant, lecturer educational disciplines of professional direction in vocational educational institutions, master of production training in higher educational institutions, manager of service centers and equipment sales centers, master, performer of work, technical or engineer to test and debug in service organizations, the inspector of quality control and so on.

 

EDUCATION LEVEL «МАГІСТР»

Qualification – Mechanical engineer

Training term – 1,5 years after level "bachelor"

Primary positions: researcher, teacher of higher education institutions, specialist in automation of production processes, developer of computer systems. The master provides research work aimed at mastering new technology and technologies, production of products that meet the requirements of the best domestic and world standards; manages experimental work on creation of new products, improvement of its quality, ensuring compliance with current standards and technical requirements, as well as application of new basic and auxiliary materials, more economical and efficient; heads up the work on finding the most advanced methods of research, testing, experimentation and reduction of labour costs in carrying out research work; participates in the implementation of new technological processes and production regimes and conducts the analysis of quality indicators that characterize products that are produced and implemented; develops perspective thematic plans of the laboratory's work.

 

1st students are fully provided by the hostel.

There is a possibility:

- military training – issued by the officer of the reserve;

- education at the Autodesk Learning Center (UK).

Department of Technology Engineering teaches subjects for students from different countries: China, Georgia, Yemen, Jordan, Iraq, Iran, Kazakhstan, Kenya, Libya, Namibia, Nigeria, Morocco, Russia, Syria, Sudan, Tunisia, Turkmenistan, etc.

Foreign students can study at the undergraduate and graduate, and engage in scientific activities while studying at post-graduate and doctoral studies.

All international students at the campus for the entire period of study at the university.

Students of the specialty "Applied Mechanics" contribute to the life of the university. They take part in student conferences, charity concerts and promotions, competitions of KVN and various kinds of competitions (football, bowling, etc.). The group's curators are trying in every way to diversify student life by visiting theaters, cinemas, skating rink, philharmonic, concerts, etc.

A graduate of Engineering Technology Department, Datsenko Volodymyr, is an adviser to the rector of the Poltava National Technical Yuri Kondratyuk University.

36011, Poltava, Pershotravneviy street, 24.

Poltava National Technical Yuri Kondrtyuk University.

Information Technologies and Mechanotronics Educational and Scientific Institute.

Engineering Technology Department, aud. 312А.

www.pntu.edu.ua

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

https://www.facebook.com/tehnologiimashinobuduvannya/

Institutional Repository
120 Birthday
Yuri Kondratyuk
internet resource of
distance education
PoltNTU
students
life
PoltNTU
pre-university
scientific center of preparation
conferences
publications
department of
international
cooperation
Olimpiads
Center of legal
assistance
union of workers
of university

CONTACTS
36011, Poltava,
Pershotravnevyi avenue, 24.
Admissions telephone:
(0532) 56-16-04
E-mail: vstup@pntu.edu.ua

HOW TO FIND US

CERTIFICATE

Box of trust

Copyright © НВЦІ
"Полтавський національний технічний університет імені Юрія Кондратюка" 2018